The compactor shelving can make full use of the warehouse space, and its data storage capacity can be increased by more than 50% compared with the traditional movable shelving cabinet. Each row is equipped with a hand brake automatic device, a buffer device, and a side row is equipped with a lock, which is safe and convenient to access. It is not easy to tilt and has anti-shock function. Each row of contacts has a sealing device, a dust proof plate on the top and a mouse-proof device on the bottom, so it has good dust-proof, mouse-proof and moisture-proof functions.
Some notes after movable storage cabinet is installed:
1). The track is embedded and flush with the decorative ground.
2). After movable shelving are installed, all the dense racks should run freely under full load conditions. The intelligent dense cabinets must not block. One person can easily shake a group of 15 rows of cabinets at no load. The force is not greater than 12N.
3). Box verticality: ± 1 ~ 2mm / row, the gap between the rows after closing should not exceed 5mm.
4). The parts and assemblies of the product should be able to maintain interchangeability.
5). Good spare parts selection, no shedding.
6). Safety protection requirements: The dust-proof plate is installed on the top of the dense rack, and the mouse-proof plate is installed on the bottom. The intelligent movable storage cabinets are sealed with anti-aging rubber and plastic magnetic seals. The closed dense rack is a seal that is not affected by external interference. Box.
Before using movable shelving , it should be carried out strictly according to the proportion in the instruction manual, and add matching diluent as required to dilute to the construction viscosity. Each component is blended. Some polyurethane resin coatings contain more free radicals, which will cause latex coatings to be yellowed and not placed next to windows or doors directly exposed to the sun, so as to avoid long-term exposure to ultraviolet rays and dry paint. For painted dense cabinets, it is strictly forbidden to cover the pads with plastic cloth or newspaper for a long time, so as not to damage the paint film.
