Compared with household furniture, office furniture is used more frequently, so you need to pay more attention to maintenance. According to the material, office furniture can be divided into steel, solid wood, leather, fabric, etc. The maintenance of office furniture of different materials is also very different. Using the correct maintenance method can make office furniture look new and extend its life.
A STEEL FURINITURE
1. Avoid bumps: This is the first thing to notice after purchasing iron furniture. The furniture should be taken care of during the transfer process; the place where the furniture is placed should not be changed frequently; the floor on which the furniture is placed should also be flat to make the furniture four The legs are stable and flat.
2. Clean and dust removal: It is best to use pure cotton knitwear as a rag to scrub the appearance of wrought iron furniture. Regarding the dust in the recesses and embossments on the furniture, it is best to use a soft wool brush to remove dust.
3. Keep away from acid and alkali: If the steel furniture is accidentally stained with acid (such as sulfuric acid, vinegar), alkali (such as methyl alkali, soapy water, soda water), immediately rinse off the dirt with clean water, and then dry it. Wipe dry with a cotton cloth.
4. Keep away from the sun: It is best to avoid direct sunlight outside the window to avoid oxidation when the furniture is placed.
5. Blocking humidity: indoor humidity should be maintained within normal values. The furniture should be far away from the humidifier. Wetting will cause metal corrosion and chrome plating to peel off.
6. Eliminate rust: If the furniture is rusty, don't use sandpaper to polish it on your own terms. If the rust is small and shallow, you can apply cotton yarn dipped in engine oil to the rust. Wait for a while and wipe it with a cloth to remove the rust. If the rust has been enlarged and heavier, you should ask the relevant technicians to repair it.
B Solid wood
1. When placing solid wood, you should pay attention not to place it in a place that is too damp or too dry to avoid mildew or dryness.
2. Avoid placing heavy objects on the surface of the furniture for a long time, otherwise the furniture will be deformed.
3. The surface of the furniture should avoid rubbing with hard objects to avoid damaging the lacquer and wood surface texture. For example, be careful when placing decorative items such as porcelain and bronze, preferably with a soft cloth. To
4. If the floor is uneven in the room, use small wooden pieces to level it. If it is a bungalow or a low-lying house, the legs of the furniture must be properly raised when the floor is wet, otherwise the legs are easily corroded by moisture. To
5. Never use wet rags or rough rags to wipe solid wood furniture. Use a clean and soft cotton cloth, add a little furniture wax or wood wax after a period of time, and gently wipe back and forth along the wood grain. To
C LEATHER FURNITURE
1. Excessive humidity will cause the hydrolysis of synthetic leather to occur and develop, resulting in damage to the surface film and shortening the service life. Therefore, rooms such as bathrooms and kitchens should not be equipped with synthetic leather furniture;
2. When wiping synthetic leather furniture, please wipe with a dry cloth. Alkaline cleaning fluids cannot be used, which will make the leather soft and easy to crack;
4. Avoid direct sunlight or close to heat sources, otherwise the leather material will lose moisture or change color;
5. Be careful to prevent the metal parts of shoes or leather from scratching the leather and try to avoid bringing pets;
6. Leather furniture needs to be cleaned daily. Wipe it with a dry towel and vacuum with a vacuum cleaner every week to maintain basic cleanliness.
D FABRIC FURNITURE
1. Keep ventilated: furniture should be placed in a ventilated place and avoid exposure to the sun. Otherwise, the fabric furniture is easy to fade and get damp.
2. Cleaning method: every time you change the cleaning cloth cover, you can spray antifouling agent to isolate dust and dirt. Usually use a vacuum cleaner to open the minimum suction to clean. When cleaning, first remove the dirt with a paper towel, and then use a foam cleaner. If it is stained with oil, add a neutral detergent to warm water, moisten it with a soft cloth, wring it out, and remove the oil by pushing and sucking until the stain is completely removed.
3. Reduce the friction of the contact part: You need to be careful not to sit on one part all the time, make it evenly stressed, and reduce the friction of the fabric furniture, so that the service life of the fabric furniture can be increased.
4. Stable handling: When moving fabric furniture, it must be handled steadily, and it must be kept stable when it is fixed, otherwise the furniture is easily damaged.
