The main purpose of our purchase of compact racks is to store more data, so the load-bearing performance of high density mobile shelving can be said to be our most important indicator. What aspects should we start from when testing the load-bearing performance of compact shelves? Let's look at it together.
The load-bearing of the compact frame is determined by the steel of different thickness. Relatively speaking, the load-bearing capacity of each layer of the compact frame is 80kg. At this time, the thickness of the column is 1.0mm, and the thickness of the partition and the hanging plate is 0.8mm. But many units have too much information, so the load-bearing needs to be increased, probably to 100kg per floor. Obviously, the previous thickness can no longer be supported, so the column should be increased to 1.2mm, and the thickness of the partition and the hanging plate should be increased to 1.0mm.
When checking the load-bearing performance of dense racks, first check the surface of the rack body. If inferior steel is used, the surface is rough, and some have no pickling and phosphating process. Such racks are easy to rust and corrode, which will affect the load-bearing performance. If it cannot be distinguished from the surface, it will cause various phenomena such as deformation, paint peeling, rust and so on once it is used later.
At this point, our WOMA mobile shelving system adopts high-load-bearing partitions, which have good load-bearing performance and are built with precision, so that users can use them more at ease. Under the standard condition of our dense rack, each layer can bear about 80~100kg. If the load bearing needs to be increased, it is necessary to thicken the rack body and the partition.
In addition, an adjustment panel can also be installed. Our dense rack body has multiple hanging holes. You can clamp it in any hanging hole when in use to achieve a gap between layers, so that you can store Items of different heights. However, when disassembling, please be careful to avoid deforming the hooks on both sides of the partition, and then it is not easy to install.
