the main purpose of our purchase is to be able to store more data ,so the bearinng perdormance of the mobile shelving can be said to be the index that we take seriously most. What aspects should we start with when testing the bearing performance of dense frame? Let's see
The bearing capacity of the mobile shelving is determined by steel of different thickness. Relatively speaking, the bearing capacity of each layer of the mobile dense frame is 80kg. At this time, the thickness of the column is 1.0mm, and the thickness of the partition board and the hanging plate is 0.8mm. However, many units have too much information, so the load-bearing capacity needs to be increased to about 100kg per layer. Obviously, the previous thickness can no longer be supported, so the column should be increased to 1.2mm, and the bulkhead and hanging plate should be increased to 1.0mm.
When checking the bearing performance of dense frame, first of all, it is necessary to check the surface of the frame body. If inferior steel is used, manual grinding is performed, the surface is rough, and some are not pickling and phosphating process. Such dense frame is easy to rust, corrosion, and affect the bearing performance. If it is not distinguishable from the surface, once used in the later period, there will be deformation, paint off, rust and other phenomena.
At this point, our woma mobile shelving adopts high bearing partition, good bearing performance, segongbuilt, so that users can use more assured. Under the standard condition of our dense frame, each layer can bear about 80~100kg. If you need to increase the bearing capacity, you need to thicken the frame body and separator.
In addition, can also be installed on the adjustment panel, our dense frame body is equipped with a number of hanging holes, you can be used when stuck in any hanging hole, to achieve the gap between layers, so as to be able to hold items of different heights. However, when disassembling, please be careful consumers to avoid deformation of the hook on both sides of the partition, and then it is not easy to install.
Of course, if you have special needs, please explain at the time of consultation, our consultants can help you choose a better product, or according to your requirements to let professional designers tailored for you!
