1. Manual movable shelves is heavy or stuck
In this case, if the movable shelves is used for a long time, the reason is probably that the butter in the linkage part is dry.
The solution is to clean up the oil residue and then re-butter the butter. If it is a new movable shelf, you can see if there are foreign objects under the load wheel, or the ground rail is not straight.
2. Manual compactor shelves derailment
This situation rarely occurs, the main reason is that the ground rail is not firmly installed, causing skew.
Solution: The manual compactor shelves needs to be pushed down to the side of the ground rail that has no problem. The loose ground rail needs to be re-installed. Because the derailment of the intensive rack is a very dangerous thing, you should not force it to push when the intensive rack is unable to move. You must ask the manufacturer to eliminate the fault before using it.
3. The manual compact shelves turntable does not move
Most of the cases where the turntable does not move are caused by the back of the drive chain stuck.
Solution: Open the side guard to see where it is stuck, and adjust the chain again, the problem should be solved.
4. Manual intensive shelves turntable idling
In this case, you turn the turntable too fast, and the anti-dumping function of the compact rack comes into play. The second is that the drive shaft pins of this row of dense racks fall off, making it impossible to transmit power to the load wheels.
Solution: 1. Slowly shake the turntable to solve the problem that the compact shelves can move normally. Second, remove the bottom partition of the compact shelves to see if the drive shaft can move normally. If it does not move, the bayonet will fall off.
5. Deformation of manual movable shelves, uprights and hanging plates
There are two reasons for this situation. One is that the shelves are overloaded, and the other is the quality of the racks.
6. The surface coating of the manual movable rack is scratched and bumped
If the movable shelves is used in an environment that is dry and ventilated, you can leave it alone. If the environment is wet, it is recommended to remove the stains on the surface and then spray the same color of self-spraying paint.
