The dense shelf makes the office life of the archives warehouse more efficient and makes the entire space spacious and orderly. The management of the compact shelving unit itself and the management of archive files are organized and convenient. As we all know, the compact rack is composed of many accessories, and each accessory has its fixed function. This article will introduce which components that seem to be unimportant but are actually indispensable.
1. The braking device of each row of dense shelf
Each row of compact racks is equipped with a brake device under the position of the rocker handle, which is an indispensable and necessary configuration. The brake device is an important device to ensure the safe work of the staff between the racks, and also to ensure the safety of the archives. Important device.
2. Dustproof board of high density mobile shelving
The top of the dense shelf needs to be equipped with a dust-proof plate, which is mainly used to prevent dust from entering the shelf and affecting the documents stored in the shelf. However, the dustproof board is not absolutely dustproof. The dust is very small and will inevitably enter the frame. Therefore, the user must clean the dust regularly. Of course, the dust will be relatively less and much more with a fully enclosed dense rack.
3. The side panel, chassis and rat-proof board of the high density movable archive rack
The overall appearance of the compact rack is neat and beautiful, so the gap between the frame body and the frame must be accurately in place, and the side panel is the key to the appearance of the compact rack. If the width of the side panel plus the sealing strip is greater than the width of the bottom frame, the chassis will appear gaps when the frame body is closed as a whole. Rats may get into the frame and damage the files. Therefore, a rat-proof board should be installed on the chassis to make the closed The gap of the compact frame is reduced.
4. Sealing device of compact shelving system
Except for the outer side of the front row and the outer side of the last row, the compact rack does not have a sealing device. The rest of the rows need to be equipped with a sealing device; the sealing device is referred to as a sealing strip, which has the function of anti-aging, tight bonding and non-deformation. At the same time, no collision occurs between the frames when they are closed, which acts as a buffer.
5. Shelf anti-dumping device
An anti-tip device must be installed under the bottom frame of each row of high density mobile shelving system. When the compact rack is in normal operation, the anti-tip hook slides in the gap of the track. When the frame body is subjected to external force or large inertia, the The force is transmitted to the track and to the ground through the expansion screw connecting the track and the ground to prevent the collapse of the compact frame and ensure the safety of operation.
