The disassembly and assembly file cabinet is a steel file cabinet with freely disassemblable and adjustable characteristics. When using this file cabinet, you must learn to assemble it yourself, which can help you in the future use. Have more flexible use results.
In the first step, we need to classify all components before assembly, check the data card to see if the number of components matches, and whether the components are complete at each location. Also check their integrity, the integrity of the components is critical, do not check the rash assembly will bring quality and safety hazards. First look at the surface of the main configuration steel to see if there are problems such as falling paint, burrs, and depressions. Then take the integrity of the accessories, see if the accessories have gaps, deformation, and so on. After these confirmations are completed, the next step of installation can be performed.
In the second part, the assembly of the disassembly and assembly file cabinet must first be built. It is necessary to first find out the components of the back panel and the side panel, and connect a back panel and two side panels with accessories to make a cushion for the later work. When installing the connecting parts such as screws, pay attention to the strength, and the flatness can not be installed, less loaded, and slippery.
The third part is to find the front side door frame and connect it with the side rear plate of the above figure. This process does not require accessories connection. The connection between them is the card slot hook. Just find the card slot for card insertion. After the assembly is completed, the door shall be inspected. The switch process is smooth, no abnormal noise, no jamming occurs.
The fourth part, find the middle waist, the top plate, the bottom plate, install in turn, and fix the screws. This order must not change, this is a reasonable installation sequence, which is related to the overall stability. The same screws and other components must be guaranteed to be flat.
In the fifth step, the latter part is the internal partition. First, find the small part of the device partition and confirm the quantity and integrity. Then set the height of the partition according to the usage and fix it with the buckle. Installation, this time completed the assembly work of the entire disassembly and assembly of steel file cabinets.
